Jump to content

killa's CC Activities


Recommended Posts

alt text
This topic will be for killa's CC Activites. Here you will be able too see my work, such as roleplay, repairs, answering calls and much more will be on the way, so be tuned.


With my pleasure, killa.


Patrol format

**Patrol Number: #**
**Date:**
**Cuban Cars Members**
**Estimated Duration of Working:**
**Estimated Number of Vehicles Repaired:**
**Screenshots:**

Roleplay format

**Roleplay Number: #**
**Date:**
**Cuban Cars Members:**
**Participants**
**Story:**
**Screenshots:**

Link to comment
Share on other sites

  • Replies 116
  • Created
  • Last Reply

Top Posters In This Topic

  • killa

    117

Roleplay Number: 1
Date: 29.07.2020.
Cuban Cars Membres: @AdemBygt
Participants: @tokiits
Story:
Screenshots:
The day started in our mechanic job place. I was cleaning my instruments when
we had a call, witch the other mechanic answered.
Then we both talked about the customer, what he said, and planned our work.
After done talking and planning, we headed to TowTruck.
And then we drove to the place, where the car was broken down.
When we arrived, we got out and checked the car, how it was looking from outside and inside of the motor.
When that all was done, it was time to hook up the car.
The other mechanic, he hooked the hook onto the car's front bumper.
When it was hooked up, we were ready to go.
After the small drive, we arrived to Cuban Cars workshop place.
Then we dropped off the car and waited for Cuban Cars member Adem to pick it up and deliver it into the Cuban Cars workshop place.
Cuban Cars member Adem slowly delivered the car into the workshop place, where everything can be done and fixed.
We both pushed the car onto the lifter and started checking the engine and talking about it what should be fixed.
After talking and investigation of the motor, I headed to talk with Cuban Cars member Adem.
After some time, Adem came and checked the motor.
At this point, Adem checked mostly everything in the motor and he assumed that the "strap" and "rollers" needed to be checked as well the "charger".
So, as Adem told, the "strap and "rollers needed to be checked, as well the "charger". So me and the other mechanic started working. The other mechanic named Tokiits, he checked the "strap" but me "rollers".
After checking, Adem came and asked us, what is the problem? We told him, that the "strap" is still in a good condition but the "rollers" are dead and they need to be changed. The "charger" was fine.
Then, I asked him, if the "rollers" are on the spot in Cuban Cars workshop and he told me that he will check it.
Some time went by and he came back and told me that they are available right here on the spot.
He told me to go get them at the office, so I went to find them.
When I came into the office, there were a lot of things wandering around, but when I deeply looked around, I finally found the new "rollers".
After finding the new "rollers" I went back to the car.
For that time, Tokiits was checking the motor what should be taken off so we would be able to change the "rollers" so we discussed it.
After discussing, we headed to the car's motor and started doing our things. First, we removed some parts that was near the "rollers" so it would be easier to get closer.
The first parts were removed and after that, Adem came and lifted the car up, so we would be able to see if everything is good under the motor.
The car got lifted up and we both mechanics checked the motor and everything else if it was in a good condition.
After checking, I and Tokiits both discussed if everything was okay and therefor, yes it was.
Then Adem came and lifted the car back down.
After lifting the car, I and tokiits changed the new "rollers" with the old ones.
When the "rollers" got changed, we wanted to test it, if the engine works, so we did. Tokiits got into the car and tried to start the motor. At first, it didn't work but for that, I checked and fixed up a little mistake we both made.
When I fixed the mistake, tokiits tried again and the engine started and everything was working fine.
After fixing and everything was working great, we took the car and dropped it off at the same location.
:::
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
:::


Link to comment
Share on other sites

Roleplay Number: 2
Date: 03.08.2020.
Cuban Cars Members: @Beckham @Trevor @n0vis0ry @Leonard @Blue @SWT
Participants: @Remp05
Story: The day started at Cuban Cars garage. We all waited for customers to arrive and we would be able to do our job what we love to do. Then the customers started coming to the Cuban Cars garage and we could start our job. My job was to check a burrito's suspension or the wheels because when the burrito would get to 120 mph, the car would shake. So I went and got underneath the car to check the back wheels, while the other mechanics checked the other wheels. Then we decided that the rear end wheels are bad and needed to be changed, as well the suspension. So we went to get our instruments and started doing the job. I removed the right rear wheel, as wheel changed the suspension for that wheel and on my side, everything was done. After that, our customer went home happy.
Screenshots:
:::
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
:::


Link to comment
Share on other sites

Roleplay Number: 3
Date: 03.08.2020.
Cuban Cars Membres: @Beckham @Trevor @n0vis0ry @Leonard @Blue @SWT
Participants: @Remp05
Story: Our second customer was already here. He told us about the problem he had in his firetruck. It was quite a difficult job to do, but that's my job and I have to do it. So the customer told us about a water system block, that is broken and doesn't work, plus there are some water leaks coming through the tubes. So, another mechanic came and wanted to help out, he first got under the car, because the water system block was underneath the car, near the firetrucks motor. The mechanic got down and checked what is happening. After checking, we discussed about the problem and what needed to be repaired. After a long talk, I started to get everything I needed to get this job finished. So at first, I went to the section, where are the tubes and the water system block. First I took the new water system block and went to put it down at the workplace. After that, I went and grab some instruments I needed. Then I got all I needed and went to do my job. At first, I got off the water tubes of the system block and put them to the side. Got off the system block and put it on my other side. After that, I got out, grabbed the new water system block, and got back down, put the new block at the same location where was the old system block. After that, I went and grabbed some new water tubes. Grabbed the new water tubes and got back to the car, got down, and started putting the new water tubes back in the old place. Everything got set back up and was ready to be tested. Then the customer came and checked if everything was okay, we talked about it and we went outside to test it. The test got done and the new water system block and tubes worked perfectly. The customer was happy about the job and went to the cashier.
Screenshots:
:::
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
:::


Link to comment
Share on other sites

Roleplay Number: 4
Date: 06.08.2020.
Cuban Cars Membres: @Leonard
Participants: @Zodiyac
Story: The day started at San Fierro Cuban Cars garage. There was me, another mechanic and Cuban Cars member. So a customer came with a Cheetah, it was in really bad condition. At first, we investigated the car from outside. It looked really bad, plus the motor was smoking, overheated. The other mechanic checked the motor and tried to find the problem why it was overheating. But I was looking more from the outside of the car, for example, dents, scratches. So, after investigation, I decided that I will change the Cheetah's left doors. After checking the doors, I went to get instruments. After taking the instruments for the door change. After that, went back to the car and sat next right to the doors and started taking the doors off the car, which included screwing out the screws and unplugging other stuff. When the doors got taken off, I went and put the doors onto a wall. After that, I went to take a color tester and when to the car to take a pigment. After taking the color pigment, went back to the office and found the spray paint that was with the same color pigment and codes. Picked up the spray paint, took a mask, and went to pick up the new doors. Then I carried the doors to the ropes, hanged the doors onto the ropes and started spray painting the doors. Some time went by and the color on the doors was dry. Got the doors off the ropes and went to the car. Holded the doors and slowly screwed the screws back in place. After some screws and plugging back, the old doors with the new doors were replaced.
Screenshot:
:::
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
:::


Link to comment
Share on other sites

Roleplay Number: 5
Date: 27.08.2020.
Cuban Cars Membres: @Leonard @Marso
Participants: @Remp05 @Poodlyz @Hetler
Story: My day started at San Fierro Cuban Cars garage. After some time, some customers started coming to the garage. My first customer was with a Lamborghini. So I popped the hood open and my boss came and told me what I had to do. The first task was to check the engine oil. So I found where it was located. Pulled out the engine oil stick and cleaned the end of the stick with a tissue so I would be able to tell, what is the level of the engine oil. It was under medium, so I went and grabbed 10W40 engine oil and refilled the engine oil to the maximum level. After that, I had to check the engines cooling liquid if there aren't any leaks or the tubes haven't been ripped. After opening the lid and checking the level of the red cooling liquid, it had to be refilled. So I went and grabbed a red cooling liquid and refilled it. Checked the tubes, didn't notice any leaks or ripped tubes, so with that was everything fine. And after that, another mechanic came and helped me out, because it was a 2 men job, checking brake fluid. So at first, I checked how was the brake pedal and it was soft. So after that, the other mechanic checked the brake fluid. And after checking, he went and grabbed everything that was needed to finish this job. At first, he was checking every brake fluid for each wheel. While he was checking the wheels and removing the air, I was pumping the brake pedal. So the air would come out. And this process got repeated for each wheel. And after the air was removed, I refilled the brake fluid and after that, the job was done. We went for a test drive and everything was working fine. The customer was happy with the job we did.
Screenshot:
:::
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
alt text
:::


Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...